凝固科学技术与材料发展2025|PDF|Epub|mobi|kindle电子书版本百度云盘下载

凝固科学技术与材料发展PDF格式电子书版下载

注意：本站所有压缩包均有解压码： 点击下载压缩包解压工具

第一部分 凝固科学技术与材料发展3

凝固科学技术与材料3

第二部分 凝固过程研究29

高温合金非平衡状态的凝固特性29

熔体过热对Al-Cu合金定向凝固某些特性的影响41

Ni-Cr-Mo三元合金定向凝固界面形态与溶质分配48

Effect of local solidifiication time on the dendrite-to-cell transition at high growth rates60

液固相变中的界面形态选择66

界面动力学对平界面稳定性的影响75

亚快速单向凝固晶体生长的非稳态演化81

Near rapid directional solidification and its superfine microstructure87

亚快速凝固中枝晶→细胞晶转变的理论研究93

Cu-Ni单相合金的深过冷定向凝固过程研究97

Mesoscopic kinetics of nonequilibrium solidifiication102

High rate directional solidifiication and its application in single crystal superalloys107

The transition mode of dilute binary alloys during directional solidifiication near to the absolute stability limit115

A multi-layer interface partition model for nonequilibrium solidifiication119

高温金属间化合物的定向凝固特性123

包晶合金定向凝固平界面前沿的形核分析129

定向凝固下共晶合金中相的竞争生长136

Microstructure selection during the directionally peritectic solidification of Ti-Al binary system147

定向凝固过程流动、传热、传质的耦合数值模拟-I数学模型155

Well-aligned in situ composites in directionally solidified Fe-Ni peritectic system159

Stochastic modeling of columnar-to-equiaxed transition in Ti-（45-48 at%） Al alloy ingots162

Investigation on coupled growth in a peritectic system173

熔体过热时间对DD3单晶高温合金凝固组织的影响178

定向凝固速率跃迁下平界面处液相溶质浓度变化及界面失稳183

Effect of an abrupt change growth velocity on directionally solidified microstructures of Ni-24.19 wt% Nb hypereutectic alloy192

第三部分 高温合金（及金属间化合物）凝固组织控制201

钼、铌对镍铬基铸造耐热合金组织及性能的影响201

镍基高温合金中MC碳化物生长规律研究212

高温合金中碳化物的初生形貌与晶体结构的关系221

On morphologies, microsegregation, and mechanical behavior of directionally solidified cobalt-base superalloy at medium cooling rate227

单晶高温合金中γ'筏形组织的形成及转动233

Effect of solidifiication conditions on MC carbides in a nickel-base superalloy in 738 LC239

Influence of solid/liquid interfaces on the microstructure and stress-rupture life of the single-crystal nickel-base superalloy NASAIR 100244

单晶高温合金定向凝固过程中晶体竞争生长观察257

Ni3Al+Ni7Hf2共晶合金的微观结构及凝固行为研究263

未来航空发动机材料面临的挑战与发展趋向268

中速生长条件下单晶高温合金组织及偏析研究278

Deformed microstructure of the single-crystal superalloy NASAIR 100 at 1050℃284

Microstructure evolution of Ni, Cr, Al-TaC in situ composite directionally solidifiied under a high temperature gradient294

熔体过热历史对Ni基高温合金定向凝固界面形态的影响299

The effect of solidification rate on microstructure and mechanical properties of an eutectic NiAl-Cr（Mo）-Hf alloy304

Microstructure and stress rupture properties of single crystal superalloy CMSX-2 under high thermal gradient directional solidifiication308

DZ 125高温合金定向凝固微观组织的CA法模拟312

Deformation characteristics of as-received Haynes 230 nickel base superalloy318

第四部分 功能与陶瓷材料凝固加工327

NdFeB永磁合金单向柱晶的制备与特性327

Microstructure and magnetic properties developed by hot pressing of cast Pr-Fe-B magnets331

Microstructure and coercivity of cast hot-pressed Pr-Fe-B magnets with copper addition and neodymium substitution for praseodymium337

Development of microstructure and preferred orientation of directionally solidifiied Pr-Fe-B permanent magnet alloy341

太阳能级硅的电磁悬浮熔炼348

高磁能积稀土钴永磁合金的非平衡凝固过程352

Relation between development of microstructure and magnetic properties of sintered NdDyFeB magnets356

离心铸造太阳电池硅片液态成形机制的研究361

定向凝固A12O3/Al-4.5Cu复合材料的弯曲性能与断裂特征366

连铸铜单晶工艺参数的匹配及其对铸棒表面质量和组织的影响374

Crystallization growth of single crystal Cu by continuous casting382

Microstructure characteristics and interface morphology evolvement of Si-TaSi2 eutectic in situ composite for field emission385

The preferential orientation of the directionally solidifiied Si-TaSi2 eutectic in situ composite391

Microstructure and fiield emission properties of the Si-TaSi2 eutectic in situ composites by electron beam fioating zone melting technique395

Research on growth orientation and directional solidification mechanism of YBCO402

Preparation and characterization ofAl2O3/Y3A15O12/ZrO2 ternary hypoeutectic in situ composites by laser rapid solidifiication406

Growth characteristic and fracture toughness of laser rapidly solidified Al2O3/YAG/ZrO2 ceramic eutectic in situ composite413

Rapid solidifiication behaviour of Al2O3/Y3Al5O12 （YAG） binary eutectic ceramic in situ com-posites418

第五部分无／冷坩埚电磁约束定向凝固429

电磁流体力学与材料工程429

Electromagnetic confiinement and shaping for a plate-form part467

The critical pressure and impeding pressure of Al evaporation during induction skull melting processing of TiAl474

Research on the non-linear temperature field of molten metal shaped by an electromagnetic fiield in DS processing478

Electromagnetic shaping and solidification control of Ni-base superalloys under vacuum484

Directional solidification of titanium alloys by electromagnetic confiinement in cold crucible489

电磁成形中对不同宽厚比矩形件所受电磁压力的三维有限元模拟分析494

钛合金定向凝固用矩形电磁冷坩埚内的磁场分布特性501

Effects of processing parameters on the surface quality of directionally solidified titanium alloy slab with cold crucible506

A preliminary study of electromagnetic confinement and directional solidifiication of platy specimens of stainless steels512

电磁无接触成形过程熔体形状的数值模拟及实验研究516

钛铝合金电磁冷坩埚定向凝固技术的研究522

第六部分 多相合金的凝固特性（共晶、包晶、偏晶等合金）531

TiAl金属间化合物的定向凝固和晶向控制531

Ti-Al包晶合金定向凝固及组织选择545

Si-TaSi2共晶自生复合场发射材料的组织与性能（556

Nd-Fe-B包晶合金的定向凝固组织及相选择561

Cu-70%Sn合金定向凝固中包晶相的生长571

Halo formation in directional solidifiication of Ni-Ni3Nb hypereutectic alloy579

考虑包晶反应的包晶层片共生生长模型585

包晶合金定向凝固中的共生生长594

Phase and microstructure selection from initial transient to steady state during directional soli-difiication of peritectic alloys605

Effects of Mn, Ti and V on the microstructure and properties of AlCrFeCoNiCu high entropy alloy609

Effects of Nb on the formation of icosahedral quasicrystalline phase in Ti-rich Ti-Zr-Ni-Cu-Be glassy forming alloys614

Microstructure evolution of peritectic Nd14Fe79B7 alloy during directional solidification618

To eliminate the composition transient zone in directional solidifiication of TiAl alloys624

Producing well aligned in situ composites in peritectic systems by directional solidification630

Peritectic reaction and its influences on the microstructures evolution during directional soli-difiication of Fe-Ni alloys633

附录 傅恒志著作及论文640